Axel Joost Elektronics
Almost every bike what runs in US have a brake light / indicator combination in the way, that 2 lamps works as brake light and as indicator as well. This makes a conversion of an imported bike according to the requirements in the EU a bit tricky and cost intensive due to some additional wiring and workshop time.
The Rear Light EU is a module for bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A conversion of an US bike according to the requirements in the EU is much easier and less cost intensive with this new module.
A brakelight dim function is activated by default. In this case is the brightness of the brakelight dimmed down to 30% if no brakeswitch is be pressed. This allow the user just wire one cable to the brake light. You can activate the function if you wire this cable to + 12 Volt or disable this function if you wire this cable to ground.
By the way, this module is not made for US cars. Pls. use the Rear Light EU-CS for a car conversation.
| Dimensions: | 40 mm x 25 mm x 12,5 mm |
|---|---|
| Body material: | ABS |
| Input voltage range: | 7 - 18 Volt |
| Connections: | Inputs 0,14 mm², Outputs 0,75 qmm |
| Output power: | Max. 15 Watt / Output |
| Maximum ambience temperature: | 80 degree Celsius |
This product was added to our catalog on Wednesday 13 November, 2019.
